When a watch is used for a long time, it is inevitable that it will have rust on its surface for various reasons, so it is still necessary to know how to prevent rust and remove rust yourself. The way to prevent rust and remove rust from a watch. Let’s learn about it.
In a closed glass container with coarse or fine pore silica gel and a small amount of discolored silica gel to form a dryer. Because the pore silica gel can only absorb a lot of moisture at 95%-100% relative humidity or directly into the solution; while the fine pore silica gel still has a high moisture absorption capacity even at a lower relative humidity. Such a mixture can meet the sealing requirements. Apply a small amount of petroleum jelly to the desiccator interface and press down to seal. The lid should be opened as little as possible to prolong the life of the silica gel. Whenever the discolored silica gel turns red, it should be dried and regenerated or replaced with a new one. In addition, when the oil and dirt inside the movement is serious or slightly oxidized, it can be scrubbed with a brush before cleaning. Anti-rust paper wrapping parts can be used with multi-effect anti-rust paper for steel and copper parts and parts with a combination of steel and copper movement parts. The rustproof paper is coated with wax on the outside (moisture proof) and a vapor phase rust inhibitor on the inside. The parts are dipped in washing oil added with 5% 901 antirust oil and washed roughly and finely once each with a brush respectively (washing oil can be prepared with industrial gasoline or lamp kerosene, and the oil seal can be dipped, brushed and sprayed under room temperature conditions. For mechanical watches in use, especially mechanical watches that are not sealed and exposed mechanical watch movement parts, into the water vapor after not timely baked thousand, resulting in the rust of the heart parts. Parts rust. The surface quality is damaged, so that the watch machine can not work properly, causing the watch to go out of time, and in serious cases, even damage the parts. In the repair, you can put the rusted parts in the gasoline soak for a period of time to soak down the brownish red or green oxide, but the time is slow and not complete. Introduce a quick rust removal solution, the specific formula is as follows: triethanolamine 75 ml, water 25 ml, distilled water (H,0) . 775 ml of the above solution mixed in proportion, you can put the mechanical watch movement parts into it quickly can remove rust. The specific soaking time depends on the degree of rusting of the parts. Luxury,