The main reasons why the Citizen mechanical watch does not go are as follows:
1. The quartz watch battery has no power or insufficient capacity, just change the new battery. When the quartz watch suddenly does not go, this is the first thing we have to take into account. 2, bad contact, most of the positive and negative contact reeds with dirt on them, and poor contact with the battery. First, the contact surface will be fully cleaned, and then reassembled well. 3. When the quartz watch is in contact with the magnetic field, it will stop moving under the influence of the magnetic field. But rest assured, the quartz watch is not the same as the mechanical watch, it will not be magnetized. As long as it is out of the magnetic field range, it will be fine. 4. Coil breakage, due to oxidation or man-made causes, damages the coil, which can be checked by multimeter testing and usually needs to be replaced again. 5, wheel system failure, this situation is because there is dust between the wheel teeth, or foreign matter, so that the wheel system teeth stuck to each other. It should be cleaned to remove the foreign matter.6.
6. The quartz meter has no output signal, other aspects have been checked, this situation is usually caused by the failure of the integrated circuit board, in this case it is necessary to replace the entire integrated circuit board, this is a more serious problem.
Warm Tips: The latest market news is always available, please pay attention to LuFuture.com app.
.
Citizen,